What changed
Hardware hacker Aaron Christophel showed how Doom can be played on a USB flash drive's built-in LCD by copying files to and from it. The drive, the MOVESPEED MSSU10, has a 128GB model that cost about 50 euros. The hacker used AI to reverse-engineer the hardware and get the game running on the drive's screen.
What this means in practice
The drive's display chip had its markings scrubbed, but an open debug port allowed the hacker to extract its firmware. Using a debug probe, he was able to read the memory and identify the chip, which is marketed for security applications like fingerprint readers and access control. The firmware revealed a 200 MHz clock frequency, but the actual measured frequency was 40.2 MHz, an unexplained discrepancy.
The drive has no buttons, so the hacker developed a PC script called doomctl.py to translate key presses into timed data transfers. Arrow keys control movement and turning, while Space or Ctrl handle firing and opening doors.
The game runs at about 13 frames per second, which is not playable, but the game logic runs at Doom's normal 35 ticks per second.
Only the first map, E1M1, fits in the chip's flash, and no sound is produced due to the lack of a buzzer.
Limitations and availability
The drive's display chip has no USB connection, and it only shows status data like transfer speed and temperature. The hacker used the storage controller's read and write counters to gauge transfer speed. The open-source project, including code and prebuilt firmware, is available for others to explore. However, the supplied announcement does not specify the exact steps required to replicate the setup or the availability of the firmware for general use. The tools needed are minimal, mainly a debug probe, and the hacker suggests backing up the stock firmware before attempting the process.
